Geeta Plyboards Pvt. Ltd.
7-65, Ist Floor, Haripriya Complex,
Habsiguda 'X' Roads,

Hyderabad - 500 007,India.
 
Email               : geetaply@rediffmail.com
  info@geetaply.com
Website           : www.geetaply.com
Business Category  :
Doors & Windows
Business type : Manufacturers
In Business Since : 2 decades 

   “Quality is never an accident, it is the result of planning, teamwork and a commitment at excellence “

Geeta Plyboards is a group with 2 decades of experience in Tier and its By-Products. Company Diversified and established highly sophisticated and State of the Art factory. All the products are manufactured as per the norms laid down by IS : Standards. Our Factory is situated as Yannampet Village, Ghatkesar

All the mechanism is controlled by our expert technicians and skilled workers. All the processes are well checked at every inch to ensure best results and only after going through the observations of the experts approval is given for the process.

Products :
  • Flush Doors
    As per IS : 2202

    The timber used for Flush Doors are seasoned and chemically treated which makes them dimensionaly stable, Termite resistant and weather proof. The Flush Doors have a sold Block Board Core with BWP grade cross bands and face veneers which are bonded with phenol formaldehyde synthetic resin in Hote Press Process with high pressure and temperature. This makes the door highly durable. STANDARD THICKNESS : 25,30, 32, 35 AND 40 mm.
  • Moulded Panel Doors
    Masonite yet another new product has been added to our existing line. Moulded Panel Doors are made out f well seasoned and chemically treated solid hardwood timber and both the faces covered with HDF (High Density Fibre) design door skins exclusively imported from Masonite International Corp. USA.
  • Block Board
    As per IS : 1659

    Block Board is made out of selected seasoned timber which is subjected to machining on new modern wood working machines and the core board is made. The Board is formed with cross bands of core veneer and face veneer bonded with phenol formaldehyde synthetic resin in hot press process with high pressure & Temperature to make it 100% boiling water proof. STANDARD THICKNESS : 19 & 25 mm
  • Exterior Grade, Shuttering, Marine Plywood
    As per IS : 303, 1328, 848 & 710

    BWP Plywood is manufactured from specially selected core veneers and bonded with phenol formaldehyde synthetic resin in hot press process with high pressure and temperature.

    It has a wide range of applications like kitchen cabinets, partitions, wardrobe, table tops, interior decoration, shelves etc.,

    Shuttering plywood can be used and reused several times under certain conditions of storage and handling.

View Larger Map

Process :
  • Kiln Seasoning
    As per IS : 1141

    The timber required for the products usually contains 35% and above moisture. The Moisture content is brought down to below 12% as recommended by IS:1708. This enhances the strength and retention and shape of the end products.
  • Chemical Treatment
    As per IS: 1141

    The wood is thereafter chemically impregnated under pressure as per IS: 401, by a specially evolved process. The resins and wax content of the solvent increase the durability by enhancing the property of waer repel lance.

Special Features :
  • Doors are ready to install, custom made
  • Smoothly finished and perfect bonding
  • Durable, Dimensionally stable
  • Klin Seasoned and Chemically Treated Timber
  • Glue used is mixed with Anit-insect Toxicants
  • Moisture Resistant
  • Weather, Water and Wrap Resistant
  • Long Lasting
All Intellectual Property Rights Reserved :            REFER DISCLAIMER