We supply welded wire mesh electro galvanized or hot dipped galvanized.In the forms of rolls or panels, for construction, fences and other industrial uses.It enjoys the feature of corrosion resistance compared with plain welded wire mesh. Mainly used as fencing panels or further fabricated into wire partitions, wire container panels, wire baskets, welded wire fences, poultry fences and other welded products. Welded wire mesh is made of high quality iron wire through automatic process and sophisticated welding technique, laid horizontal and vertically, individually welded at every intersection. The end product is level and flat with sturdy structure.Welded mesh is extensively used in industrial, agricultural and construction industry purposes.
Welded mesh is manufactured with long and cross wire spacing’s varying from 25mm to 150mm with 2mm to 6mm wire diameter
Application: Mainly used as fencing panels or further fabricated into wire partitions, wire container panels, wire baskets, welded wire fences, poultry fences and other welded products. In construction in the form of reinforcement brick mesh, welded bar gratings or wire mesh sandwich construction. A wire mesh sandwich construction which comprises an array of line wires, an array of cross wires overlying said array of line wires and a barrier material disposed between the array of line wires and the array of cross welded wires. The array of line wires is joined to said array of cross wires at the points of intersection and through the barrier material, thus securing the barrier material between the array of line wires and the array of cross wires.
Expanded metal is a form of metal stock made by shearing a metal plate in a press, so that the metal stretches, leaving diamond-shaped voids surrounded by interlinked bars of the metal. Expanded metal is mainly applied as platforms and stair trends for construction, vessels bridges and boilers. They are also used as reinforcement for light construction materials and concrete pouring, radiator grills on all types of vehicles and air compressors, safety guard for gear drive equipment on various kinds of machines.
Expanded metal is also used in grates and in outdoor furniture (e.g. benches) or fencing. It is often used for guarding to prevent contact with hot surfaces or machinery A major advantage of expanded is that the mesh is formed from a single piece of material so the process is not wasteful and therefore cost effective.
Because of its jointless continuity it is a highly efficient conductor of electricity, magnetic flux and heat. Expanded mesh can be supplied in a variety of finishes, thickness, raised or flattened. Flattened is smoother and does not indent soft materials if this is a consideration but is not as strong as the more robust raised mesh. Powder coating in your choice of colour will enhance its aesthetic appearance and add to its corrosion resistance as would plastic coating.
Chain Link Fencing
Chain Link Fencing is produced with quality galvanized wire or PVC coated galvanized wire and is normally used for protection around machinery or in test areas, protection against flying objects yet permitting visibility of operations behind screens and it is also used in outdoor fencing for security purposes.
The wires run vertically and are bent into a zig-zag pattern so that each "zig" hooks with the wire immediately on one side and each "zag" with the wire immediately on the other. This forms the characteristic diamond pattern seen in this type of fence.
Fencing usually comes in 50 ft rolls which can be joined by "unscrewing" one of the end wires and then "screwing" it back in so that it hooks both pieces. Common heights include 3 ft 4 ft, 5 ft, 6 ft, 7 ft, 8 ft, 10 ft, and 12 ft, though almost any height is possible. Common mesh gauges are, 11, and 12. For tennis courts and ball parks the most popular height is 10 ft.
The popularity of chain-link fence is due to its relatively low cost and ease of installation. A further advantage is that due to the open weave, chain-link fences are transparent, and do not obscure sunlight from either side of the fence. If a semi-opaque fence is desired, this can be achieved by the insertion of slats into the mesh.
